Wednesday, June 20, 2007

Electric Vehicles Are Slow, Right?

How about this electric motorcycle, doing the quarter mile in 8.168 seconds at 155.78 mph? There's video of it.
John Lott's Freedomnomics

I was hoping to sell this as a book review somewhere, but I can't find any magazines that will publish anything by me anymore except Shotgun News, so....

Freedomnomics: Why the Free Market Works and Other Half-Baked Theories Don’t. John R. Lott. Regnery Publishing, 2006. 275 pp.

The cover art shows a slice of apple pie—with stars and stripes and an explanation, “A Rebuttal to Freakonomics and More”—thus explaining the “half-baked” in the subtitle. If you weren’t paying attention a couple of years ago, Freakonomics was a very successful popular book on economics. Dr. Lott’s book is a defense of free markets aimed at much the same audience—-people in the middle who aren’t quite sure what to think about how well free markets work. I rather doubt that people who are either strongly supportive or strongly hostile to free markets are going to have their minds changed by Freedomnomics—-but almost everyone will find some of the examples that Lott gives entertaining or thought-provoking.

Lott articulates how and why the free market behaves the way that it does. While this behavior may sometimes frustrate us as consumers, it nonetheless provides useful benefits to the society as a whole. Lott explains why hurricane Katrina drove up gasoline prices before it hit, as oil companies raised prices to reduce demand and enlarge gasoline inventories. After Katrina damaged Gulf of Mexico well platforms, pipelines, petroleum terminals, and refineries, those enlarged inventories helped keep prices from rising higher than they otherwise might. Oil companies didn’t do this because they were looking out for the benefit of consumers, or because the government told them to do so—but because they were trying to maximize profit. As Adam Smith observed about butchers, brewers, and bakers, we don’t get gasoline because oil companies are concerned for our needs, “but from their regard to their own interest." We might not like it, but self-interest is a far more certain motivator than benevolence.

Many of the most surprising sections of the book concern topics where economists have done statistical analyses to try and test particular hypotheses. As much as anyone else, I assume that campaign contributions have some significant influence on how legislators vote, but Lott provides an ingenious example of how he tested this problem, by studying the voting record of members of Congress who retired in 1978, and did not go on to other government service or lobbying. In their last term, without the pressure of raising money, they presumably were now free to vote their consciences without fear of reprisal—-and astonishingly, it had no effect (pp. 50-53).

The real problem of campaign contributions isn’t usually quid pro quo corruption (although Lott acknowledges that this happens too) but that special interests contribute money to people that genuinely share their beliefs. As Lott points out, “Politicians from Kansas really do think that farmers are the backbone of America. Those from Detroit really do want to help the car industry.” (p. 56) This is no surprise; a Silicon Valley candidate who didn’t see electronics as a vital American industry would not be able to raise enough money to defeat a candidate more in line with the values of big campaign contributors.

While most of Freedomnomics examined statistical work concerning interesting social problems, Lott sometimes gives examples from his personal experience, such as what happened when he involved himself in a Montana tax limitation initiative campaign in 1986. He soon learned that while it was perfectly okay for professors to involve themselves in the campaign against the initiative, the economics department at Montana State University was threatened with a cut in funding if they could not get Lott to shut up in support of the measure. Lott was younger and more naïve back then, “but I was surprised by the vehemence with which people who receive their income from taxes fought to protect that largesse.” (pp. 7-11)

In light of Lott’s highly publicized research into crime rates (More Guns, Less Crime, for example), it is unsurprising that he devotes an entire chapter to economics and crime. In particular, he points to inconsistencies and factual errors in the work by economists Donohue and Levitt that claims that Roe v. Wade (1973), by legalizing abortion, caused a dramatic decline in crime rates in the 1990s. Lott instead presents evidence that suggests that legalizing abortion, by reducing incentives for men and women to be careful, increased the number of illegitimate births—-and points out that children of single mothers are actually at higher risk of becoming criminals. Lott says that the decline in crime rates in the 1990s was in spite of legalizing abortion, not because of it. While I am not sure that I find his argument persuasive, he does demonstrate that Donohue and Levitt’s opposing claim is not a slam-dunk.

Perhaps the most startling claim that Lott makes is that women’s suffrage caused a dramatic increase in the size of government, because the “gender gap” reflects a genuine difference in how men and women—-especially single or divorced women—-see the appropriate role of government with respect to income security and education. He points to how state government expenditures changed in states as the percentage of women voting increased—and how the varying years in which different states granted women the vote confirms that this was not a coincidence.

Even if you don’t find every argument convincing, Freedomnomics will make you think about issues that you have never even considered before. Best of all, Freedomnomics is entertaining, crisp, and free of the sometimes off-putting statistical lingo that scholarly papers concerning economics necessarily employ.
Muslims Are Supposed To Pray Towards Mecca Five Times a Day...

A friend worked on a jumbo jet refit for the Sultan of Brunei, and among other items on board was a "Mecca finder": something that was tied into the navigation system of the aircraft so that the gold-tipped pointer always pointed towards Mecca.

I don't know how long you are supposed to wait before getting down to pray, but this picture suggests that it is either not very long--or Mecca isn't the direction of adoration for this group.

Admitting The Goal is to Not Hire An American

Look, if you can't find an American to do a job, there's nothing wrong with hiring a foreigner. Many years ago, I was trying to hire software engineers in Silicon Valley, and I ended up hiring a South African through an H-1B visa, because we literally could not find an American. It wasn't even a matter of salary--there was just no one available.

To get Department of Labor approval to hire that South African, we had to run ads to demonstrate that we couldn't find an American. We weren't gaming the system; we did exactly what we were supposed to do, and if we had found even a minimally qualified U.S. citizen or permanent resident, we would have hired that applicant instead, because it would have been faster and less expensive. We tried; we failed. Like many people who come to America with nothing, within ten years he was independently wealthy.

Over here is a video showing an immigration lawyer explaining how to go through the process, and admitting that the goal of how and where they place ads is to not hire an American, but to hire a foreigner.

I am sympathetic to companies that are having trouble hiring people--but there's not a shortage of skilled workers in the U.S. Pretending otherwise is dishonest.

Tuesday, June 19, 2007

Band Saws

I am thinking that perhaps what I need to do the rough cuts on the next Delrin project is a band saw. Not a big band saw--Sears has a 9" band saw for $119--but a band saw seems a bit more controllable than a router. Since everything that I need to cut is a rectangular solid, this has potential.

I need to see if my neighbor who does woodworking has one. I think I want to experiment a bit before I commit myself to one.

And yes, I know that band saws have another common use--by butchers. Even more than a drill press, one must exercise great care in using a band saw.

UPDATE: One of my neighbors has a band saw--a 12" Delta that looks ancient enough to have been made somewhere that at least they use a Roman alphabet, even if they don't speak English. This is definitely the way to do this. He didn't have a fence appropriate to my needs, but even free hand, I managed to do an adequate job of making a couple of rough cuts.

Not wanting to wear out my welcome, I stopped with two rough cuts, and didn't make the other two, much larger rough cuts--and regretted that decision for the next several hours, as I removed a .35" x 1.57" x 2.75" chunk of Delrin with an end mill. To my surprise, I found a monstrously big end mill--0.75" diameter and about 1.75" tall cutting surface--and so I was able to make make all my motions in the X and Y planes. But because of the height of the cutting face of the end mill, I was only taking off 20/1000ths of an inch on the forward pass, and 5/1000ths of an inch on the backward pass. (Trying to take off more than that caused it to chatter.)

In spite of, I thought, extraordinarily careful measurement, the final result would not quite fit into the leg, so I had to make a few cuts here and there. The good news is that the final version slides right in, and is actually more amenable to band saw work, with just a few minutes of precision work with the end mill.

My plan to use the Vixen leg as a template for positioning the holes in my piece worked perfectly, and it actually looks like something that might have come out of the Vixen factory! (Provided, of course, you don't look at the ugly surfaces that are now hidden inside the tripod leg. Production will be better.)

I also made a set of casters for a customer who sent me his leg (tripod leg, of course) because the Celestron 93493 tripod isn't exactly the same dimensions as other Celestron tripods that I have made for. This went very well; I received the leg today, measured it, picked out the stock to work from, and machined the parts in time that I will be shipping the leg and the caster set back tomorrow. Had I been thinking a bit farther ahead, I could have dropped them at the post office this afternoon.
Sorry For The Lack of Activity Here...

I have been extraordinarily busy for my employer, and my spare time has been spent this evening reading H. Richard Lamb, ed., the Homeless Mentally Ill: A Task Force Report of the American Psychiatric Association (1984). Surprisingly enough, while they criticized the method by which deinstitutionalization was implemented, and the reports contain some occasionally veiled references that show that they were holding their tongues a bit, they were reluctant to criticize the idea. But they essentially argued that yes, there were patients who benefited from deinstitutionalization, but there were others who very clearly were worse off as a result. (Surprise, surprise.)
A Unique Use for Fish and Chips

They won't let decent people have guns in Britain, so they are reduced to improvising their weapons:
A chip shop worker faced with an armed robber scared him off by waving a fish slice dripping in hot fat.

Malcolm Butters, 63, was closing up the Green Lane Fish Bar in Acomb, York, when he was confronted by a man carrying a gun and demanding money.

Mr Butters said: "I got my fish slice, dipped it in the hot fat and waved it at him, hoping the fat would come off and get him."

The hooded man then ran out of the shop empty-handed, Mr Butters said.
"You can have my breaded cod when you pull it from my cold, malt vinegar soaked fingers!"